Automatic bandsaw line with robot
Automated sawing and stacking by robot relieves personnel resources and creates free space for other activities.
Manpower is only required for loading the material onto the transfer roller conveyor and for removing the pallets with good parts.
The automatic sawing line for plastic pipes can be loaded by forklift. For this purpose, the raw material is placed on a transfer roller conveyor. The sawing process and required cut-off lengths are entered via the touch control. After program start, the material is fed to the bandsaw fully automatic via electrically driven roller conveyor. After the saw cut, the plastic pipes are removed by a robot. The robot sorts trim cuts, good parts and remnants. Good parts are cleaned of chips, deburred at the end face and then stacked on pallets. At the same time, the next saw cut begins.